Make a PVC Catapult

In this I will show you how to make a simple catapult out of PVC pipe.
All the materials you will need are:
4 1" PVC pipes
4 4” PVC pipes
6 3” PVC pipes
5 corner pieces
4 T connectors
3 end pieces
1 4 way connector
4 2 way connectors
Duct tape

To cut PVC pipe, you just need to buy a large pipe of it from a hardware store and cut it with a hack-saw.

For this one you will need:
2 4” pipes
4 3” pipes
4 Corner pieces
2 T connectors.
Assemble them like in the picture shown.

For this one you will need:
4 1” pipes
2 2” pipes
2 T connectors
4 2-way connectors
And assemble it like the picture below, and add them to the base as also described in the picture below.

For this you need:
2 4” pipes
2 3” pipes
1 4-way connector
2 end pieces
1 corner piece

Then add the duct tape to the end piece to make the basket for the catapult, like in the other picture below.

Now add that onto the rest of the catapult, and you are finished.