Make Your Own 3d Printed Faceshield

Face Shield is designed to be 3d printed quickly and to be easy to assemble and use..

You can download it right here or through the Thingiverse link:

https://www.thingiverse.com/thing:5731735

Rafts: No

Supports: No

Resolution: 0.3mm

Infill: 30%

Filament material: PETG or ABS

Notes:

It is important to use materials such as PETG or ABS, as according to studies, they are tolerant to chemical products used in hospitals.

This design does not require custom shapes or holes in the shell material. All you need is a 0.3mm thick, 300mm by 200mm acetate sheet and a regular elastic band to create a support for your head.

With an ordinary rubber band in hand, wrap one of the ends on the back of the faceshield (as shown in the image) and then wrap the other end of the elastic on the opposite side of the facefield.

Then, cut a 0.3mm thick acetate sheet to the size of 300mm x 200mm and insert it into the front groove of the faceshield.