Make a Knife From a Pair of Scissors
by EthanBeltramo in Workshop > Knives
16063 Views, 41 Favorites, 0 Comments
Make a Knife From a Pair of Scissors
Materials
- scissors
- sharpie
- knife
- pliers
- 6ft of 550 paracord
- dremel (optional)
- lighter
- sharpie
- knife
- pliers
- 6ft of 550 paracord
- dremel (optional)
- lighter
Dismantling the Scissors
If your scissors are broken you can skip this step:
I personally think this is the hardest step. Use a knife to pop of the cap. Then, pop out the metal piece holding them together. Now pull them apart
I personally think this is the hardest step. Use a knife to pop of the cap. Then, pop out the metal piece holding them together. Now pull them apart
Color
Use the sharpie to color
Get Paracord
I used six feet of black paracord
Wick It
Wick the paracord with a lighter
Adding the Paracord!
Put end as shown in image
Begin Wrapping
Just wrap around Handel until in the opening
Adding the Cross-wrap
Weave the paracord in a figure a around the opening
Adding the Loop
Go through the end and form a loop
Finish the Loop
Tie a good knot
Finish
Cut the excess paracord and wick it again
Enjoy
Enjoy