Lego Torch Case
things your going to need are: lego, torch and a base and now on to the building!
Measure
measure how big the walls need to be e.g mine is 16 x 8 and 9 blocks high
Building
Next you have to to do the building the best way to build is putting 1 2x4 block half way on on top of another one then for the end you can put a 2x2 block next to the top/bottom block like in the image shown above.
The Front
the front is going to need a gap in the middle so you can see the light and turn it on the walls can be just normal but don't forget that gap!
Sides and Back
sides, they are like the walls but with less pieces but here you should make sure you make a little window to see if anything is going on on the inside and the back is the same as the front but with no holes in it just a plain wall.
Roof
the roof is just a normal roof but it needs a hole in the middle to poke your fingers in and fix anything on the inside and if your torch has a hook (like mine) you need a hole for it to hang on to things!