Knex Nerf Disc Holder

This is my very easy to do Knex Nerf Disc Holder. It takes about 5 minutes to do and it only uses 24 pieces.

It is also adjustable to the number of discs you have.

You only need 24 pieces to complete this:

2 Rods of any size you want (to accommodate the number of discs you have)

4 Orange or Brown Connectors

4 Yellow or white connectors

8 White or gray small rods

6 Tan or blue connectors (Do not necessarily have to have the stem cut off)

Get the 4 Yellow or White Connectors and the small white or gray rods.

Put them together like the pictures shows.

Now connect the orange or brown connectors to the small rods as shown in the picture.

Now add the other rods (of any size) to the middle hole of the two parallel connector and then sap te other rod on the last connector of the connector.

(I even confused myself while typing this step)

Add the small connectors to both ends of the long rod.

The final step is to add two small connectors to the inside of whatever side you want and push that side all the way to the end of the rod.

The cool thing about this is that it is adjustable. This is of my own design so i'm proud of it.

This is my first Instructible, So if you see something that i could improve on please comment below.

Thank You