Knex Manual/Motor Gear Box

by mathsboy314 in Living > LEGO & K'NEX

6567 Views, 9 Favorites, 0 Comments

Knex Manual/Motor Gear Box

RIMG0046.JPG
RIMG0047.JPG
RIMG0048.JPG
RIMG0049.JPG
Welcome! Here are instructions to create gearbox that can easily be set to motorised or manual. It's hard to explain so here's a video:

http://www.youtube.com/watch?v=mEJXXfG4YsE

The Base

20200413_134656.jpg
20200413_134706.jpg

Yeah, everything else goes on here.

The Motor

20200413_135248.jpg
20200413_135257.jpg
20200413_135318.jpg
20200413_135346.jpg
20200413_135352.jpg

This section is the motor.

A Bit of Support

20200413_135450.jpg
20200413_135500.jpg
20200413_135512.jpg

It's easier if this is just an extra step. If not the next step is too long.

The added pieces in this picture are: 1 green rod, 1 white rod, 1 blue rod, and 1 yellow connector.

Moving Gear

20200413_135812.jpg
20200413_135914.jpg
20200413_140010.jpg
20200413_140115.jpg
20200413_140302.jpg

This gear shifts forwards and backwards to mesh with either the motor's gear or the manual gear.

The Manual Gear

20200413_140714.jpg
20200413_140723.jpg
20200413_140731.jpg
20200413_141201.jpg
20200413_141209.jpg
20200413_141220.jpg

If the motor jams, switch to this.

The "output" Gear

20200413_141447.jpg
20200413_141606.jpg
20200413_141634.jpg
20200413_141641.jpg

The rod is what to connect the turning part to. It could be any size.

How to Use (you're Done Anyway)

20200413_141716.jpg
20200413_141733.jpg

With the motor facing towards you, if the trigger is left, turning is manual, if the trigger is right, then the turning is motorised.