K'nex Ferris Wheel Lift With Instructions
by autumsawesome in Living > LEGO & K'NEX
1905 Views, 2 Favorites, 0 Comments
K'nex Ferris Wheel Lift With Instructions
This is another lift that I will use in my ball machine "Carbon"
Here is a video of it in action!
It is quite simple but I still like it, I hope you do too!
Entrance Rail
Follow the pictures, then put it aside.
Main Frame Supports
Follow pictures then put aside.
Main Frame Supports
Build all six of them.
Entrance Support
For the second picture use the supports which you just made.
Main Frame Supports
Follow the pictures.
Exit
Follow pictures.
Top
Build according to the pictures.
Motor Box
Build it.
Wheel Rails
Build all four of the rails.
Wheel Arms
Build them.
Wheel Arms
Build these separately.
Wheel Arms
Build the arms from one of each type.
Wheel Arms
Follow the pictures.
Wheel Axle
Build it.
Wheel Middle
Build both of these.
Wheel Middle
Connect them like this.
Wheel Middle
Follow pictures.
Complete the Wheel
Follow the instructions.
Complete the Wheel
Attach the rails.
Main Frame
Build half of the main frame.
Main Frame
Build the other half, and put it together.
Attach the Wheel
What the title says... You are almost done!
Top
Attach the top.
Exit
Put on it the exit.
Motor Box
Attach the motor.
Frame Supports
Follow the pictures.
Frame Supports
Do almost the same thing on the other side.
Subscribe. Comment. Like.
YAY!!! you are done!!
Here is a few more pictures on how the ball should go when turned on.
And as the title says:
Subscribe
Comment
Like
That's all for now. Autumsawesome