Knex Ball Dispenser

It has been a few months since I posted. So I thought: "I need to post something.'' So, that's exactly what I'm doing. I'm posting via computer now, so it'll take some more time just to put these together. But anyway, today I'm giving to you something simple. This is a Knex ball dispenser. It can hold up to maybe 8 Knex balls at one time. How it works is you pull down a lever and the balls will roll down the slide.

psst......I don't have that many Knex balls, so I just estimated (;

This is where the balls will sit. T-t-that's it. There's no other way of describing this.............

So here is where the fun part comes in. This is the rest of the body. In pic 11, there are 2 rods you have to add. I didn't get a picture of that. If you are looking at this via computer, I added a note to that pic. I don't think (as when I post this) you can see the note via on the phone. But, just a heads up on that. The rubber bands I thought would be perfect, cause when you pull down, the slide part will just go back up, hence also why there are wheels as the counterweight.

Not sure if you guys seen the meme, but that's why it's titled like that. Just thought I'd make it a bit funny :). Anyway, this here prevents the balls from falling out, even when you are trying to dispense them. Unless, you open it up as shown in pic 2, then you can get 'em.

HEY! Did you just skip to the end, or did you actually build this? Well, I hope you built it! Or maybe you didn't. But you could have. But you could have just checked this out. Buuuuuuuut, you could have......you know what, forget it. Either way, I hope you guys liked this! If you guys have any questions or comments you have on this, let me know! I'd be happy to reply! Well, that's it for me. Until next time, keep on rolling! -Knexified