Indestructible Binder

by Kaiven in Workshop > Metalworking

38914 Views, 206 Favorites, 0 Comments

Indestructible Binder

IMG_0154.JPG
IMG_0153.JPG
All of my binders end up getting trashed sooner or later. Carrying around 2+ text books and 2+ binders every hour of the day is a great way to wear out book bags and school supplies.  Usually, my binders start tearing along the seams and I have to duct tape them back together.
I got a really nice 1.5" binder with locking rings that are very durable.  The problem was that the front and back were tearing off and the duct tape was peeling as well.

I decided to step up DIY and use metal to fix my beloved supply binder. Here is the design I came up with, I hope you enjoy!
Please rate, comment, subscribe, and vote for me in the Back to School Contest!

EDIT: Thanks, Instructables, for featuring my creation and giving me a 3 month pro membership. You guys rock!

Materials/Supplies

IMG_0053.JPG
IMG_0056.JPG
IMG_0057.JPG
IMG_0055.JPG
IMG_0054.JPG
One reason why I wanted to make a metal binder is because I have too much sheet aluminum.
My teacher found out that I like to make stuff and she obtained a bunch of sheet aluminum for free.

Anyways, here is what I used. It helps to have a workplace:

Materials:
~Sheet Aluminum
~Fake Leather
~Rivets
~Bolts and Nuts
~an old binder with good, sturdy rings

Tools:
~Rivet Gun
~Tin Snips
~Drill and bits
~Permanent Marker
~Rubber mallet and center punch
~Ruler
~Dremel with metal cutting disk

Making the Front and Back

IMG_0058.JPG
IMG_0060.JPG
IMG_0061.JPG
IMG_0064.JPG
IMG_0062.JPG
IMG_0069.JPG
IMG_0070.JPG
IMG_0077.JPG
IMG_0078.JPG
IMG_0071.JPG
IMG_0065.JPG
IMG_0072.JPG
IMG_0067.JPG
IMG_0068.JPG
IMG_0073.JPG
IMG_0076.JPG
IMG_0079.JPG
I measured my old binder and rounded up to the nearest half inch for the dimensions of my new binder.  My front and back panels are 10.5" x 11.5"
I cut the thick aluminum with tin snips. It was not easy, but it was way faster than using a dremel.*  When cutting, do NOT cut all the way to the tin snips tips. It will leave crimps in the aluminum that is hard to get out. As you cut, peel the metal diagonally away from you.
Once all of the sides are cut, use a RUBBER mallet to flatten out any waves in along the edge.  Use a file or sandpaper to smooth the edge. Don't want to get cut at school! Make sure to round the corners too.
Once you have done all of that... do it again for the back. This was a tedious process for me.

*If you have a band saw or scroll saw that can cut soft metal, USE IT!!

Making the Spine

IMG_0080.JPG
IMG_0081.JPG
IMG_0082.JPG
IMG_0083.JPG
The spine is easy. It's pretty much exactly the same as the previous step, except smaller.
(I separated the steps so they would be easier to follow)
Make sure you transfer all of your school supplies and homework to a temporary binder so that you don't mess up any important documents.
Now we're ready for de-constructing the donor binder.

Binder Rings

IMG_0084.JPG
IMG_0086.JPG
IMG_0087.JPG
IMG_0088.JPG
IMG_0089.JPG
IMG_0090.JPG
IMG_0085.JPG
IMG_0092.JPG
IMG_0093.JPG
IMG_0094.JPG
IMG_0095.JPG
IMG_0096.JPG
IMG_0097.JPG
IMG_0098.JPG
IMG_0099.JPG
Here I just attacked the rivets holding my binder rings in place by use of my dremel.

Make sure to measure the distance from the edge of the back piece to the middle of the rivet in order to correctly place the rings onto the new binder.

My rivet hole was 3/4" away from the edge.

I measured the holes on the new aluminum panels and marked the location with a center punch. Then I drilled the holes and bolted on the rings.

Connecting the Spine

IMG_0105.JPG
IMG_0106.JPG
IMG_0107.JPG
IMG_0109.JPG
IMG_0110.JPG
IMG_0111.JPG
IMG_0112.JPG
IMG_0113.JPG
IMG_0115.JPG
IMG_0116.JPG
IMG_0117.JPG
IMG_0118.JPG
IMG_0114.JPG
IMG_0119.JPG
IMG_0120.JPG
IMG_0121.JPG
IMG_0122.JPG
IMG_0123.JPG
This part is kind of tricky... you can use any method you want to.
I originally was going to use chainmaille links, but I would have to drill a hole every 6mm for that to work... and do it four times.
Then I was going to use hinges, but I didn't have enough to cover the whole spine.
So my last idea was to use some fake leather material I made before and rivet the binder together.

I screwed up multiple times. Try to not screw up like I did.

Finished...?

IMG_0129.JPG
IMG_0128.JPG
IMG_0126.JPG
IMG_0130.JPG
IMG_0125.JPG
IMG_0133.JPG
IMG_0132.JPG
IMG_0124.JPG
IMG_0127.JPG
IMG_0134.JPG
Pretty much, this binder is done. All that is left to do is grind down the bolts sticking out the back of the binder.
A simple binder clip can be used to hold pages in place. I did this for one day at school because I didn't have time to design a pocket. It works quite well.

We Want Pockets!

IMG_0135.JPG
IMG_0136.JPG
IMG_0137.JPG
IMG_0138.JPG
IMG_0140.JPG
IMG_0139.JPG
IMG_0142.JPG
IMG_0141.JPG
IMG_0143.JPG
IMG_0144.JPG
IMG_0147.JPG
IMG_0148.JPG
IMG_0149.JPG
IMG_0145.JPG
IMG_0146.JPG
Okay, so the clip worked... but it wasn't enjoyable. So I made a pocket design shown in the pictures.
It's just a simple trapezoid, but I would suggest putting the cloth in the bottom LEFT corner instead of putting it on the right.  Because I did that, my pages are now sticking up on the rivets.
Oh well, it doesn't affect the closing/opening/use of the binder... but if I ever make another one, I will redo that part.

Now Your Finished!

IMG_0154.JPG
IMG_0153.JPG
IMG_0152.JPG
IMG_0150.JPG
Booyah! Now people will be asking you to make them a metal binder too. It turns out that a lot of my friends have problems with their binders breaking.
I hope this binder holds together. So far, so good.

Thanks for viewing my Instructable! Please vote for me, I would love to have at least one graphic t-shirt in my poor wardrobe :D


P.S. I forgot to mention that one of the rivets needs to be ground down a little. Make sure it is out of the way of the middle ring.