Improved Hood Light LED Mod

by XOIIO in Circuits > LEDs

6190 Views, 13 Favorites, 0 Comments

Improved Hood Light LED Mod

15 015.jpg
This instructable will show you how to modify me Hood Light LED Mod so you get more light.

Step 1: What You Need

15 001.jpg
15 002.jpg
You will need:
Wire
LED reading light
Modified hood light
Tools:
Soldering iron and solder
Hot glue gun and glue
Wire strippers and cutters
Screwdriver

Step 2: Start

15 005.jpg
15 004.jpg
Start by taking apart the LED reading light and desolder the wires.

Step 3: Cut

15 006.jpg
Now cut the circuit in half.

Step 4: Solder

15 007.jpg
15 008.jpg
Now solder wires to each LED board. Then solder them together in parallel

Step 5: Dissasemble

15 010.jpg
Now open up the modified LED hood light, desolder the LEDs from the wire and the resistor. Then solder the LEDs to the wire and the resistor.

Step 6: Glue Pt. 1

15 011.jpg
Now cover any exposed wire with glue, but NOT the resistor.

Step 7: Glue Pt. 2

15 012.jpg
15 013.jpg
15 013.jpg
Now tuck all the wires into the base, glue the LED circuits into place and hold fr 2 minutes. Then clean any glue strands.

Step 8: Done

15 014.jpg
Now put the cover back on the assembly, and test it out!

Final Note

XOIIO.jpg
Thank you for viewing my instructable. Please leave any comments, questions or suggestions, and please rate my instructable. Thanks!