How to Mod a Nerf Crosscut Into a Shotgun

1. unscrew the screws on the nerf gun
2. take the saw cover off
3. take the saw and unscrew the screws underneath
4. take the gun cover off
5. take the shooting mechanism out
6. remove the plunger
7. unscrew the plunger end off
8. take the end of the firing part off (it should be easy to slide off)
9. unscrew the part indicated in photo nine
10. pull air restrictor out and all the other loose parts
11. screw it back together this step makes it into a shotgun
12. put the new spring on and screw in the end of the plunger and slide the two pieces together
13. put the firing mechanism back into the gun case and make sure all the springs and gears are in place
14. screw the other half of the gun on
15. put the saw on and screw the saw cover on
16. you should now have a nerf crosscut that can fire two bullets at a time

nerf crosscut

Screwdriver

Spring (optional)

make sure that you are allowed to modify in your state