How to Make an EGG INCUBATOR - Full Automatic

¿Cómo HACER una INCUBADORA de HUEVOS? 🐣🐥 [Paso a Paso]

Hello Friends,

In this video you will be seen egg incubator make from 3d printing and some comercial materials step by step!

I hope you enjoy this video.

Thank you so much for watching my video. And Please like, share, comment and subscribe to see more videos update. Thank you!

STEP 1. Bill of Materials and Tools

Materials Required :

1.Water Can - 20 Liters

2.3d printer

3.Temperature And Humidity Meter controler

4.Motor 12 volt

5.Power Supply

6. Hot resistance 200 watt 12 volt

7. 12 volt Fan

8. Fresh Eggs (2-12 Days Old)

9.Glue Gun

10. Dogs feeder

Step 2: Manufacture All Parts

To manufacture the pieces I attach the 2D plans. You will need a 3D printer for the plastic parts and some sheet steel that can be substituted for wood if you don't have a sheet metal cutter.

Follow 2D plans for print frame in PLA or ABs, enough.

For steel parts, is needed an axe, for allow the rotation of the sheet central metal. For allow eggs spin, should be enough with plastic part which fix eggs in the middle part.

It's important take 12 volts for every electrical part. In order to get the same power supply for every part.

STEP 3: HOW IT WORKS - Instructions

Easy. Chicken Eggs Take 21 Days To Hatch....For Hatching Eggs In Incubator

We Need To Maintain Temperature In Incubator 37°C - 39°C And Humidity 50% - 65 % .....

For Better Results.Turn The Eggs Daily 3-4 Times Till First 18 Days Of Incubation....

After 18 Days Stop Turning Eggs And Increase Humidity To 65% - 80% Chicks Will Comes Out Of The Eggs (Hatch) Between 19-24 Days