How to Make a TRAP DOOR to Protect Your Base!!!

Today were going to learn how to make an awesome

TRAP DOOR to protect your base!!!

So you built your very first Minecraft base only to have it destroyed by some guy with some TNT. Now if only you had read this Instructable that could have been prevented. So here we go, how to keep your base safe with a few easy steps.

Now first things first you are going to want to hollow out your entrance a little, but it is good to start with a 2x2 hallway and then hollow it out from there.

Now you want make sure you have a pressure plate down and place some of your Redstone down in a line working its way up to two parallel pistons (make sure there sticky pistons) and attach two blocks of stone to them. After doing that step on the pressure plate to make sure that it works.

Now repeat step three on the opposite side of the hallway.

Now the last thing you want to do is to disguise it so whoever tries to intrude is unaware of the trap. Just cover all the blocks you can without destroying your Redstone as that would sever the connection between the pressure plate and the sticky piston. Also consider changing the pressure plates to math their surroundings better.

Now have no fear of intruders as you have made it to the end of this instruction and will be well protected against all foes.