How to Install Prebond Itip Extensions With the Fusion Method

by Doctored Locks in Living > Beauty

1605 Views, 2 Favorites, 0 Comments

How to Install Prebond Itip Extensions With the Fusion Method

Screen Shot 2017-09-25 at 7.44.44 AM.png
fusion prebond.png

Installing prebonded extension hair is easy with fusion! Doc shows how to do an installation perfect for DIYers and professionals!

For this tutorial you will need:

Ready to learn the fusion method? Follow along in the video!

Section

Screen Shot 2017-09-25 at 7.42.33 AM.png

Separate a piece of the natural hair using a clip.

Heat

Screen Shot 2017-09-25 at 7.41.58 AM.png

Pick up your heat wand and a keratin tip/chip. Place the chip/tip onto the heat wand and let it become molten.

Add Extension

Screen Shot 2017-09-25 at 7.42.20 AM.png
Screen Shot 2017-09-25 at 7.42.47 AM.png

Pick up a piece of extension hair, combine it with the natural hair, and pinch both pieces lower than the attachment point.

Use Heat Wand

Screen Shot 2017-09-25 at 7.43.06 AM.png
How to Install Prebonded Extensions with Fusion - DoctoredLocks.com

Apply the heat wand with the adhesive to the attachment point.

Roll and Rotate

Screen Shot 2017-09-25 at 7.43.23 AM.png
Screen Shot 2017-09-25 at 7.43.39 AM.png

Let cool slightly and roll the bond into place. Do a rotation test and check for cross hairs; reheat and reposition if needed Repeat until desired style is reached.