How to Draw the Easiest Zentangle Design

Hi, This instructible will guide and help you to make the easiest zentangle design especially for beginners in very short time. Request you to please follow the steps one by one and get this design in your art book as shown.

Please follow my youtube channel for more such videos and tutorials.

Youtube- sarabjeetworld

Instagram- sarabjeet_world

Well for this project, I used

1- Standard drawing file

2- Micron markers

3- Artline Markers

4- Black sketch pens

5- Scale

6- Graphite pencil.

In the first step to begin with, I made a small flower shaped figure as your can see in the image.

You can make it of any size as per your drawing file.

In this step, just give the flower the outline to give the highlighted effect, with 2 nail like shapes in each leaf as shown in the image.

In extension to the flower we did in step 2.

Make a long leaf like shape from the right side of the flower as shown with 3 waves on the top.

The leaf again give the outline with a broad tip marker to give the highlight effect on the leaf like shape, we made in step 3.

and make a line just under the leaf following the wave as shown in the image.

In this step, the new line that we did under the leaf shape, make 2 bigger flower leaves joining the first flower we did in step 1.

the end point of the line... make a small horizontal heart shape with a spike in the end, and outline it with a broad marker to highlight it like the rest of the sketch.

In this step, the center leaf out of the 3 we did. start of with a center black following with a flower leave shape and in the end give a straight line pattern to it as shown in the image.

In the first leaf after the straight line pattern, fill the rest of the space with circles of different sizes from small to large.

highlight the bigger ones to give a stone effect as shown in the image.

Leave to the left of the center, fill the entire space with flower leaf like structure in it.

In the second leaf, after filling the entire space with leaf like structure give a nail shape in the entire leaf pattern as shown in the image.

In the third remaining leaf follow the same leaf like pattern but this time do it with 2 lines instead of 1 and then fill it with nail shape again.

Start filling the leaf we did in step 3 with small circles formation as shown in the image.

nothing special to be done in this step. just repeat what we did in step 10. make small circles formation inside the circles we did in step 10.

In the last step, give a small black circular shape in all the circles we did in step 11. after covering the entire space the zentangle design will look beautiful like this in the image. Hope you like it. Follow for more.