How to Draw the Best Zentangle Geometric Design for Beginners

Well I am always fascinated by the Geometric Designs and their perfection.

In this Instructable i am basically making a Zentangle inspired Geometric Design

Please use the Video and Pictures both for reference.

Like my Tutorial

Subscribe to my Youtube Channel: https://bit.ly/1WcfqhA

Support me on Patreon: https://bit.ly/2uMXZwF

Regards,

SarabjeetWorld

So in the first we will begin with making a circle with the help of a compass.

In this design everything depends on the compass for perfection.

In this step we will make 2 circles, one slightly bigger than the other.

Divide the circles in 4 quadrants with the help of a ruler.

In this step with the help of a ruler.

We will divide the 4 quadrants in to half and make it into 8 equal parts.

In this step we will be connecting both the ends on all the 8 lines with each other with the help of a compass.

We will pick line one by one and will draw a circular shape with the help of a compass.

Use pictures and The video for reference.

This is how it look after connecting all the lines and drawing the circular shape with the help of a compass.

In this step we are actually going to make 2 more circles.

One circle will touch the leaf type structure that we just did in our previous steps.

The other circle will be slightly bigger than the previous circle.

Now when your sketch is ready we will start giving it colors.

I chose only a black marker. you can start covering the outer most border first with black marker, as shown in the video.

And then coloring the small triangles as show in the picture, we will color only right side of the smaller triangles and leaving the other side blank.

We will color this design starting from the outside and coloring as we come inside the design.

So in this step we will color the next section, but in this we will color the opposite section to what we did in the previous step.

In this step in the next we will again take the bigger triangle to cover this time again its going to be the opposite section to that of our previous step.

Now we will be covering the smaller triangles into black.

The center most piece is left to be covered which we will divide into small triangles and then cover it into black triangles.

Lets cover the outer circle region as shown in the picture.

As this section was relatively big so first i used a thin graphic marker to cover the edgers & then i used the bold marker to cover it faster.

Now please refer the picture and follow the remaining section.

So finally following all the step with the help of just one compass and one black marker we did this beautiful

Zentangle inspired Geometric Design.

Please share it with your friends and follow my youtube channel for more such tutorial and fun topics.

My Youtube Channel : https://bit.ly/1WcfqhA

Support me on Patreon: https://bit.ly/2uMXZwF