How to Create a Braided Weave With Full Coverage and Open Part Lines

by Doctored Locks in Living > Beauty

1116 Views, 3 Favorites, 0 Comments

How to Create a Braided Weave With Full Coverage and Open Part Lines

Braided Weave Sew In Extensions Installation - DoctoredLocks.com
How to create a braided weave.png

Want to learn how to install a weave? In this video Doc will show you the techniques needed to pull off a successful braided weave!

For this tutorial you will need:

  1. Wefted Hair
  2. Weave Needle
  3. Thread
  4. Weaving Cap
  5. Sheers
  6. Rubber Bands

Ready? Follow along in the video and lets get started!

Cornrow

Screen Shot 2017-09-21 at 9.05.40 AM.png

Start with hair cornrowed, expect for the front hairline and a small section of the top part.

Secure Tail Braids

Screen Shot 2017-09-21 at 9.10.26 AM.png
Screen Shot 2017-09-21 at 9.10.48 AM.png
Screen Shot 2017-09-21 at 9.11.03 AM.png
Screen Shot 2017-09-21 at 9.11.19 AM.png
Screen Shot 2017-09-21 at 9.11.42 AM.png

Fold a cornrow up and ends down so that they are sitting in the groove between braids. Put the weave needle through the braid and tack stitch the braid into place. Repeat for the rest of the braid tails.

Weave Cap

Screen Shot 2017-09-21 at 9.12.12 AM.png
Screen Shot 2017-09-21 at 9.12.27 AM.png
Screen Shot 2017-09-21 at 9.13.13 AM.png
Screen Shot 2017-09-21 at 9.13.47 AM.png
Screen Shot 2017-09-21 at 9.14.29 AM.png

Place a weave cap over the cornrows. Pull the front hair forward and band it out of the way. Cut out a notch for the top part section.

Secure Weave Cap

Screen Shot 2017-09-21 at 9.14.51 AM.png
Screen Shot 2017-09-21 at 9.15.31 AM.png
Screen Shot 2017-09-21 at 9.16.03 AM.png
Screen Shot 2017-09-21 at 9.16.06 AM.png

Put the weaving needle through a cornrow, weave cap, and back through the thread to anchor the weave cap into place. Continue sewing the cap to the braided base until it is secure. Cut off the weave cap tag (if applicable).

Begin Adding Wefts

Screen Shot 2017-09-21 at 9.17.07 AM.png
Screen Shot 2017-09-21 at 9.17.43 AM.png
Screen Shot 2017-09-21 at 9.18.25 AM.png
Screen Shot 2017-09-21 at 9.19.00 AM.png

Begin sewing the wefts onto the cap starting as low as possible for maximum coverage. Continue working in rows up the head until you reach the crown.

Finish

Screen Shot 2017-09-21 at 9.19.18 AM.png
Screen Shot 2017-09-21 at 9.20.16 AM.png
Screen Shot 2017-09-21 at 9.20.56 AM.png

Use smaller rows on the crown with hair going the direction you need it to for the finished style.