How to Connect FlySky Transmitter to Any PC Simulator (ClearView RC Simulator) || Without a Cable

Guide to connect FlySky I6 with a computer to simulate flight for beginners of wing aircraft.

Flight simulation connection using Flysky I6 and Arduino does not require the use of simulation cables.

Components used:

- FlySky I6 TX

- FSIA6B RX

- Arduino Nano

Proceed with wiring between FS IA6 and Arduino Nano:

FSIA6B | Arduino

- VCC -> VIN

- GND -> GND

- Signal -> TX

- Open Arduino Compiler

- Load to: File -> Examples -> EEPROM -> eeprom_clear

- Download Firmware to Arduino

Download and setup some Software

Software link:
- vJoySerialFeeder V1.1: https://github.com/Cleric-K/vJoySeria...

- vJoy software: http://vjoystick.sourceforge.net/site...

- ClearView RC Flight Simulator (simulation software): http://vjoystick.sourceforge.net/site...

- Open vJoySerialFeeder V1.1 and connect to Arduino through COM Port

- Adding 4 channels in vJoySerialFeeder is equivalent to 4 channels of transmitter(FSI6)

- Open ClearView RC Flight Simulator and setup vJoy

Choose plane and fly!!!