Martha Grow Tent Mushrooms - Every Step Explained With a Video

3.3 Controlled Greenhouse "Martha" as Fruiting Chamber

⚙️➡️🍄 This video is the basis if you want to build a in door grow tent. It is also called martha. Indoor mushroom cultivation is easy if you have a good tent. You need it to control the humidity content in the air, regulate the air flow and to set the time you want to have for illumination. In this lecture series, I will teach you how to set it up and to build the needed parts. I designed them in a way that the system is very cheap. You may need access to a 3d printer. All the electronical components can easily be sourced!

🍄 Here you will find the .pdf script for printing and offline use!

📂 https://drive.google.com/drive/folders/1B2OIvdmnxRqS1MRcuJaII8CSyUZvPqu5?usp=sharing

🛠️ Here you will find the .stl files for 3D printing!

📂 https://www.printables.com/de/social/308294-diymushroomtek/models

DIY Controller With Relays, Sensor and HMI for Martha Grow Tent

⚙️➡️🍄 In this video I will teach you how to build your own controller to be able to set up a good growing tent (Martha). In this tent you can grow plants or mushrooms. My design is originally for mushrooms. You can control temperature, humidity, airflow, and illumination with it. If you want to use it for growing plants, you just need to change the 12 v led bars to the specific grow light your plant needs.

Printed Ventilation System With HEPA Filter for Martha Grow Tent

⚙️➡️🍄 In this video I will teach you how to build a air ventilation system for your martha that is water proof. This is needed, because you will have a high humidity content and you also will have lots of spores in your tent. That is why it will also create an under pressure. In that way no spores will be released into your home! Printed on an Ender 5 Pro with direct extrusion and a 0.6 mm nozzle. White PLA.

Printed Humidifier With Replaceable Parts for Martha Grow Tent

⚙️➡️🍄 In this video I will show you, how you can create you on humidifier system. It is very cheap, because you only need to by one part! You can create an individualized setup with big or small tank and also with the number of active humidifier heads of your choosing! That means it is suited for many different grow sizes! For the normal martha tent I use two heads. In this way you have an failure proof system, that works great.

Martha Grow Tent Illumination Through Watertight LED Stripes

⚙️➡️🍄 In this video I will show you how to install LED Bars or LED Band into your Martha Grow Tent. Both solutions work fine. The LED bar is very easy to install, but always all the led will be on. If you want to be able to only light up some shelves, you should go for LED bars and safe some bucks on your energy bill!

Appendix

You want how to perform cloning and work your way up from agar to grain to sawdust spawn?

In my Playlist you will finde everything about building a Martha grow tent, and also about processing the Mushrooms.

Playlist: https://youtube.com/playlist?list=PLXvEgYTHVXhSg5zQmrsDehrYzA1yyK7Ow