How to Create a NFC Detector

In this tutorial I will be showing you how to make a NFC detector. It's very easy.

All you will need is :
-wire (any decent length)
-tape
-LED
-NFC Enabled device
-scissors

Just wrap the wire in a coil around your 4 fingers (I'm 14 so try 3 fingers if your older). Leave the first and last bit of the wire out. You don't need as much as I used but oh well.

Tape the top part so it doesn't fall apart. Pretty simple.

Strip the ends of the wire, I used solid wire but ANY thin wire will work :)

Bend the ends of the wire in so its easier to attach the LED. (You don't have to if your using clips or soldering)

Just put the LED in the bent bits and it is FINISHED! (This can get very annoying)

Turn on NFC on your phone. Simple.

Place your phone on top! DONE WOW OMG POWER I'm not kidding you, this works!