House Shaped Bed (twin)

House shaped twin bed for kids

Mattress size 90x200cm

Made from 21mm plywood (6mm and 18mm plywood for drawers)

• 6 sheets of 21mm plywood
• 2 sheets of 6mm plywood
• some leftovers of 18mm plywood
• drawer slides
• dowels
• screws
• glue
• paint

Dimensions can be found at attached sketchup file (was sketched for 18mm plywood, but actually was made of 21mm plywood)

Cut plywood sheets to size using circular saw

Holes for drawers were cut using jigsaw, then cuts smoothed on router

Almost all parts are connected using dowels and glue to avoid visible screws

Used also screws where they are not visible

Boards for frame are made gluing 4 pieces of plywood together

Everything connected together on dowels/ glue and screws

Approximate cuts for holes were cut using jigsaw, then finished with router/ template

Drawers made of 18mm plywood (bottom from 6mm plywood)

Fronts are made from 21mm plywood, handles are routed

Final assembly - parts are glued/ screwed together

I tied it do it so, that there is no any visible screw, but it is still possible to break bed apart if needed

Then painting - I guess hardest part :)

Done!