Hexa-hunt (fully 3d Printable Board Game)

I always wanted to make a board game and I made my first in 6th grade (It was bad, really bad) out of wood. Since then (a few years later, I am currently attending 8th grade at Maria-Theresia-Gymnasium), I got my 3d printer and Fusion 360 “skills” and I made a new one. It is 100% 3d printable and only takes around 9 hours to print. The game is a lot of fun and I put a lot of effort into it since I made it from scratch.

You basically only need filament in different colours and a 3d printer, the couloirs you need will depend on which biomes you want to play, I used green and orange for the desert and forest biome.

-3d printer

-Black filament

-Yellow, gold filament

-Two of these colours: orange, yellow, brown, green, blue, purple

-Two more colours of your choice for the player figures

Here is the design process in fusion 360 of the 4th iteration.

I would recommend you to print the models with 0.28 layer height to achieve the 9-hour print time, you could also use 0.2 layer height for better tolerances. I designed the tolerances on this model, so it could print on printers with bad accuracy or even elephant's foot. You need to print:

1x - Game_Board in white

9x - Treasure, bandit in black

9x - Trasure, bandit in yellow, gold

9x - player, Top peaca, cover in blue or green

9x - player, top peaca, cover in brown or orange

1x- player, Top peaca, cover in any color you like

1x- player, Top peaca, cover in any color you like

Here's the game-guide. Have fun!