Graded Card PSA BGS Frame for Pokemon
4426 Views, 0 Favorites, 0 Comments
Graded Card PSA BGS Frame for Pokemon
This instructable will show how to make a frame for your graded cards. They should fit PSA/BGS and other cases like 1/4 in screw downs. You can also customize it to fit one-touch cases.
Youtube video:
Supplies
Foam Board
Get from Michaels/Walmart/Hobby Lobby
1/4" screw down cases
https://amzn.to/31YVg4K
One-touch magnetic cases
https://amzn.to/35SlpD5
MCS 16x20 Inch Collector Card Wall Display, Holds 20 Sports Cards, Black
https://amzn.to/3kL10X5
Ribba Frame, black 19 ¾ x 9 inch (50x23cm)
https://www.ikea.com/us/en/p/ribba-frame-black-603...
Ribba Frame, black 11 ¾x34 ¾ inch
https://www.ikea.com/us/en/p/ribba-frame-black-803...
Measure and Cut Foamboard
Every picture frame will be different so measure accordingly. if you're using the same Ribba frame is me, then use the measurements shown in the photos.
Finish
Put everything together and you have a frame. Check out my video for more detailed steps.
Youtube video: