Glowing Gin and Tonic

by BevCanTech in Outside > Camping

584 Views, 6 Favorites, 0 Comments

Glowing Gin and Tonic

20230125_221818.jpg
20230125_153431.jpg

Drinking from a glowing jam jar is sure to get a comment or two and if you use it on a camping trip it can help with illumination.

The inspiration for this simplified project came after seeing an instructable which used a glass flask filled with glowing liquid. The liquid being tonic water - shining a UV light on it causes quinine in the tonic water to fluoresce.

Supplies

Plastic Jar

Straw

u/v Light Emitting Diodes

CR2032 Battery

Battery Holder

Tonic Water

Gin (Optional)

Hot Glue Gun

Soldering

20230125_134708.jpg
20230125_143802.jpg
20230125_142616.jpg
20230125_144514.jpg

Solder a couple of uv LEDs to a small CR2032 battery holder.

Simple Shortcut

20230125_143214.jpg
20230125_143246.jpg
The simplest way to fix a LED to a CR2032 battery is just to slide it on and fix with some sellotape.

Hot Gluing

20230125_143512.jpg
20230125_144946.jpg
20230125_144929.jpg
Fix the LEDs on to the battery holder with some hot glue.

Fix Out the Jar

20230125_152308.jpg
20230130_095904.jpg
20230130_095925.jpg
20230125_153431.jpg

Drill a hole in a suitable plastic lid of an empty jar (maybe jam or peanut butter jar) to allow a plastic drinking straw to be inserted.

Hot glue the battery holder to the underside of the lid, next to the hole. Check the lid can still screw onto the jam jar.

Checking Banknote

20230125_150614.jpg
20230125_150604.jpg

The UV LEDs can be tried out by checking banknotes as most will have a marking only visible under ultra violet light.


Add Tonic Water and Turn On

20230125_221818.jpg
20230125_222204.jpg
Fill the jam jar with gin and tonic water, turn on the uv light and screw on the lid. The tonic water will take on a eerie blue glow.