Glass Etching Stencil

I just made an instructable on how to etch glass, and in it I said I would do an instructable on the stencil. This is another thing I am trying. So here it is I hope you enjoy.

1. Electrical tape or any other tape except duck tape
2. Sharp knife or craft knife
3. Sharpie
4. Paper
5. Image to stencil

In order to make a stencil you need to have a image. It is best to have a simpler image like above, don't choose a complicated image like above.

I would reconend printing and using a light box to trace it, but I just used my phone. Place the paper on your phone get a rough copy then take it off and out line the drawing a little better. Now use the sharp knife to cut out the parts you want to be shown. If you need a preface that you left off just use tape to re secure it

Using the tape make a square long enough to incase the image. The take the sharpie and paper stencil and color in the holes. Finally just cut out the colored area and your done.

If you look on Amazon the stencils are pretty expensive and I had all the materials laying around. I thought it was fun and you should try doing it also. I hope you enjoyed and if you did please like and subscribe I would enjoy feed back to thanks and bye