Free, Mechanics Swivel Workspace

by aaahotdog in Workshop > Woodworking

2702 Views, 14 Favorites, 0 Comments

Free, Mechanics Swivel Workspace

GEDC0014.JPG
This project was totally free with items found on trash day in my neighborhood.

GEDC0001.JPG
To start with, I found a swivel drafting stool waiting for trash pickup.  Just what I need for this project I thought.   You will have to use your imagination about the condition of the seat and backrest since I removed them before snapping my first picture.   Think gross!!!   Anyway here is the base ready to go

GEDC0002.JPG
GEDC0004.JPG
I salvaged some plywood from a pallet and had some hardware from another salvage project.

GEDC0006.JPG
After cutting the plywood to size, I measured the hole positions, drilled the holes and mounted it to the frame.

GEDC0008.JPG
Then Hi-Ho, Hi-Ho to the local hazardous waste recycle center I go.   My paint selection today is bright orange and black.  After applying 2 coats of each, it is starting to look decent.

GEDC0004.JPG
As a repair aid, I salvaged a magnet from a hard drive and mounted it on the corner to hold screws that I remove from future projects.

GEDC0014.JPG
GEDC0013.JPG
I am a person that frequently services pcs laptops, printers, etc.   This being on a swivel is nice as I can rotate the workspace without having to move the equipment or move out of my chair.   When salvaging items I would definitely find a barstool or chair that is on a swivel base.

1557-1203-0816-3055.jpg
OK...... maybe I lied a little.   This project did cost me 2 paint brushes which I got at the dollar store for 3/1.00.   Let's just call it practically free instead!!!!!