Frankestain Head With Plasma Lamp for Halloween Decoration

Hello Im Frankestein with plasma bulb on my Head, does it scare you..HaHAHAa.....

This is a frankenstein head figure with plasma lapm on head, so it will look great on halloween night, it will look like a living head with electrical energy in its head, let's make and complete your helloween night decoration.

# This you need

• USB Plasma ball https://www.amazon.com/electric-light-plasma-burner-flash/dp/B00KD6MHF2
• Acrylic paint https://www.amazon.com/Acrylic-painting-beginners-students-professional/dp/B088R8KHHK/ref=sr_1_8?dchild=1&keywords=acrylic+paint&qid=1633211954&sr=8-8
• epoputty https://www.amazon.com/EPO-Putty-Aquarium-12pc-Case/dp/B00Q3MCCTG/ref=sr_1_2?dchild=1&keywords=epo+putty&qid=1633212032&sr=8-2
• 3d printer

#3d printing

• for basic model we use a 3d printing model, you can make any character and cut on the head make hole with dimention same with plasma ball size, the Frankestain .stl file we add in this step (you can download).

#sclupture

• For best surface the 3d model we need cover all surface with a epoputty make a detail for this step
• wait until the clay dry.

#Painting

• prepare a Acrylic paint
• use a base skin color to all surface
• make a skin tone by splashing paint with a brush and pain more dark in deep surface
• make is look real

# Install the plasma lamp

• disassemble the plasma lamp, we throw away the plastic cover
• remove the glass ball on the plastic cover
• Insert the plasma ball into the hole in the head of the figure, strengthen it by adding clay to the connection of the head and glass ball, make it like a plate shape that unites the head and light bulb, wait until it dries

# Install the pcd board to nack base

• Make a base for the head, the base is made manually, scluptur with clay, shape like wires and neck veins pic.no.1
• di dalam plasma bola terdapat pcb boar untuk menyalakan plasma di dalam bola, take it out and put it inside the neck of the frakenstein figure.
• Insert the red wire like the one in the picture into the hole of the plasma light bulb when joining the neck and head of the figure

# Finish

• ok thats it, you're done

Thankyou, Eric Dirgahayu.