From 2d to 3d - How to Make Your Beads Stand

This instructable will show you how to make a semi 3d shark and rocket with hama beads.

It is a part of a series of instructables that aim to help explain how you can use beads to prepare kids for learning how to work with 3d-printing.

Hama Beads

Glue

Baking paper

Tools:

Iron

Large hama beads plate

First step is to make your 2D figures on the bead plate. Here I have made a rocket.

Then heat up your iron and put a piece of baking paper on top of your figure. Then carefully heat it up, so the beads melt together. Don't use to much heat and no steam iron!

When all the beads have melted together you can take the beads of the plate and turn them around. Put baking paper on the new side and also heat that one up.

Then make a foot. Good beads for this is see-through, black, white or the colour of your design. I have used see through beads here.

Now glue the foots on to your design and that is it. You now have a standing hama bead model.