Felt Fish Sushi

I made a cut up fish to look like sushi.

I use a tape measure to measure the stripes at 1 inch wide and 4.5 inches long. If you had a cutting board, you could use that to measure the stripes. Use what use for you. Use a maker to make where to cut.

Put glue on one end then glue end together. Add glue inside the roll and add the Cottonballs, you may have to stretch out the cotton to fix the roll.

Cut and glue small pieces of felt to make the inside of the sushi.

To make the head cut out two triangles and glue them together with the long open to add the cotton. For the eyes I use maker, but you can add buttons, or beads.

I add a fin at the end of the fish and two on the side of the fish.

Arrange rolls the way you want to make it look like a fish.