Fanny Pack

In this Instructable I show you how to make a fanny pack from scratch.

The Tool and Materials I used:

• Old Jeans
• Zipper (46 cm): http://amzn.to/2slFiC0
• Plastic buckle: http://amzn.to/2slFiC0
  
• Sewing Machine
• Scissors: http://amzn.to/2EDWbwP
• Seam Ripper: http://amzn.to/2EDWbwP

In this video I show you how I made my Fanny Pack from some old denim.

Along with the video you can follow the (easy) steps below :-)

Youtube Video

• Get your materials.
• Draw the shape of the pack to the jeans. (it depends a bit on the size you like to have. I used my zipper as a reference, 46cm wide).
• Cut it out.

• Draw a line at the place where you would like to have the zipper.
• Cut the line, so you have 2 pieces now.
• Sew back together the 2 pieces, this is just a temporary stitch, we will open it up later when the zipper is installed.
• Fold down the seam so the surface is flat
• Place the zipper in the middle of the seam
• Sew the zipper in place
• Open up the temporary stitch (I used a seam ripper)
  

Now your zipper is ready.

• Close the pack by sewing the open seam
• Turn the pack the right side out.

• Cut out 2 strips, about 6 cm or 2,5 inch wide. (so the result after sewing will be about 2,5 cm or 1")
• Sew 2 tunnels (inside out)
• turn the right side out
• Sew them onto the sides of the pack
• Attach the buckles

Done, and ready to wear.

Thank you for checking out my Instructable ;-)

Please also check out my youtube channel