Fairy Necklaces

by isabelthebuilder in Craft > Jewelry

379 Views, 1 Favorites, 0 Comments

Fairy Necklaces

200890F4-2561-4C9F-A2D0-167A6C7B8C54_1_201_a.jpeg
598D2B83-8D13-4930-BFC7-3CEAD3DC6CEA_1_201_a.jpeg

These necklaces are gorgeous , I've made them in many different colours and they always turn out so beautifully. Another great thing about these necklaces is they use lots of beads I found I had that I hadn't used in years. I feel lost most people have had beads at some point so this is a great use for them if you don't have enough for a full necklace of them.

Supplies

4459783D-3EF9-4268-BC2E-418A7B77F04A_1_201_a.jpeg
9BA2C7BB-F220-4E59-951B-4E19CF6A8B5B_1_201_a.jpeg

Ive labelled all the supplies. You can use whatever beads you wish.

What you need:

Seed beads (at least 3 colours)

Pearl beads

Some type of glass or crystal bead

Heart beads

Flower beads

Pendant

Scissors

Pliers

Bull dog clasp

Beading wire

Soldered shut jump rings

jump rings

lobster clasp

crimp beads

crimp bead covers

Measuring tape

Getting the Wire Ready

B1198A4A-126C-4BE3-A780-71766AF216C1_1_201_a.jpeg
BC92B7A6-AB32-47C1-9869-7722538E0901_1_201_a.jpeg

Use your measuring tape and cut 22 inches of beading wire.

This easily makes a 18 inch necklace once you've gotten used to closing off the necklaces it could make a 20 inch however its best to start off with 18.

Secure your wire with a bulldog clip.

Start Beading

1A91943A-2783-48F0-803C-E7F4C4C917BE_1_201_a.jpeg
EAB4CA9F-0C33-477F-8FAD-E05289844658_1_201_a.jpeg

. Start with seed beads and randomly place your statement (pearls, crystal, flowers etc.) beads throughout.

Pendant

4D5534C6-2673-4EA4-8D21-7E13277C0574_1_201_a.jpeg
9D8C6B8B-ACA0-4E9E-A8BE-F7A0D69A7375_1_201_a.jpeg

When you reach the half way mark (9 inches) bead your pendant and then continue beading as before.

Beading Finished

2227D86A-FF64-4E9B-AA5D-8CE19976C30E_1_201_a.jpeg

When your beading is done it's time to start finishing the necklace. By securing the edges.

Crimp Beads and Jump Rings

10B09AD9-7C68-4D5A-9B8B-17C4A923F287_1_201_a.jpeg
D84B3B77-150E-494C-B46D-96BC5536A9C9_1_201_a.jpeg

Bead crimp rings ( you only need one I used 2 to be secure) and then a soldered shut jump ring.

Thread the wire back through the crimp beads make sure the wires don't cross.

Crimp Beads

036585F8-587A-4729-B7B3-C78657E1D8FE_1_201_a.jpeg
4A04FA50-AD73-46D6-A3B0-3794706F01C1_1_201_a.jpeg

Using your pliers apply pressure to the crimp beads they will flatten. (shown in photo above)

Crimp Bead Covers

17044542-9D43-4B7A-997B-75567DDE4388_1_201_a.jpeg
607C1FA6-1583-48D9-BB45-ACD4D60B1EE0_1_201_a.jpeg

Place these beads over the crimp beads. Then like the last step apply force so they shut over the crimp bead.

Thread Through

BC6336A6-10CB-4A95-A6A1-E62677604DBB_1_201_a.jpeg
5CEFAE7E-9D12-4FEC-A0DB-43B6ADF989C3_1_201_a.jpeg

Thread the excess wire back through the beads feel free to trim it also.

It should look like the second photo.

Other Side

4BABD2DC-D1CD-42DB-9739-592688E9A439_1_201_a.jpeg
DD589135-B4C4-4FEA-814F-4F4422F25A04_1_201_a.jpeg

Repeat on the other side however this time you will need to open a jump ring and thread a lobsterclap.

Then secure it onto the soldered shut jump ring with pliers.

The lobster clasp will open and close the necklace.

Done!

6F1DDED9-C642-4120-A698-49B3F0C721DB_1_201_a.jpeg
A4A9D39C-931D-44AC-9673-13287A6A9D81_1_201_a.jpeg

The second photo is under direct sunlight and these look stunning. I really recommend.