FNAF 1 Cupcake | Full Working Animatronic

This is a simple but cool animatronic Project for the FNAF 1 Cupcake

• 6-Servos
• Arduino(I used an Uno)
• Servo Shield (PCA9685)
• 3d Printer
• Filament of choice(me:Pla)
• Joystick
• Potentiometer
• Button
• Something to paint

For 3d printing you do not have to do too much, you just have to slice the Files

(Scale them to 100000%) and Print it

DON'T FORGET SUPPORT!

You Need to Sand a few things and remove the Support so that's basically it you'll also need some type of screws I mostly used 3mm screws they should work good. And like always if you have Questions just Ask

So now is the time to get your Servos, screws, rods, and of course 3D Printed parts. they are pretty self-explanatory from the names in the stl

Wire everything together like in the Picture and i personally wired the input of the servoshield to the ground and 5v of the arduino so i can power them both with one cable. for the candle just use any led i used an preprogrammed led from an fake Candle light. Just atach the power and ground to the input of the servoshield and it will light up when you power the arduino on. If you want to turn it off and on wire the led in an open port on the arduino, but you will have to change the code their is nothing included to change any LED

We have 2 Codes for the Eyes 1 that Blinks Automatically and 1 that blinks manually with the button. The Code is Originally from Will Cogley's Mid-Tier Eye Mechanism. I Modified it a bit to work with my Mechanism. If you want, you can make the Eyes more Realistic with his Video The Eyes Are the Same Model

I just used Acyl - Paint for this but you can use everything you want. Priming it might be better tho