Epoxy Pendant With Gemstone(s)

This instructable will show you how easy it is to take any gemstone or broken pieces of gemstones that you may have and give them another chance at becoming beautiful jewelry again! ☆

• 1 silicon pendant mold ( any shape you choose).
• 1 gemstone or broken pieces of gemstones ( any size that is smaller than the inside your silicon mold).
• 2 part epoxy ( I used Gorilla glue epoxy).
• 1 toothpick ( to mix the epoxy).
• 1 small disposable container ( to mix the epoxy).

With the toothpick, mix your epoxy thoroughly for approximately 30 seconds inside a disposable container.

Pour epoxy into the pendant mold; a little more than half of the way full ( leaving a space for the gemstones so the epoxy doesn't over flow out of the mold).
Place the gemstone or pieces of gemstones into pendant mold into the epoxy; before the epoxy dries. Let the epoxy dry for 30 minutes before moving on to step 4.

After at least 30 minutes, remove the dried epoxy from the mold. Your pendant is finished! Add a jewelry loop and attach the pendant to a chain or chord necklace. Wear or gift your creations! ☆

☆ Please share photos of your creations! ☆