Easy and Powerful Electric Nerf Gun

Have you ever wanted to make your own Nerf gun? In this, you will make a nerf gun that when you push a button fires. Have fun building.

Air motor, a syringe without a needle, button, tubing, wires, 2 AA batteries, 2 AA battery holder, hot glue, popsicle sticks, and paint (Optional).

Make a base with popsicle sticks 2 inches high, as long as you want, 2 inches wide. Glue them together. Attach the tubing to the syringe and take out the pusher. Take off the rubber piece that is on the pusher. That will be your bullet. glue the syringe on the place that you want the bullet to come from.

Solder wires between the battery, button, and air motor. Attach the tube from the syringe to the Air motor. Hide the air motor in the base. Glue a popsicle stick where you want the trigger to go. Glue the button on the popsicle stick. Press the button and check everything is good. If not working, go back and do this step again. Glue the battery to the top. Now, finally put in the rubber pusher cap. If you push the button it should go flying out. If it doesn't go too far, put in a higher battery. Do not go over a nine-volt battery. If you want to make it cooler, you can paint it and put a laser on the top. Congrats, you are done! Have fun!