Ductanium Bandage

by Mrballeng in Outside > Survival

18308 Views, 105 Favorites, 0 Comments

Ductanium Bandage

IMG_5090.JPG
Ductanium Bandage
IMG_5084.JPG
IMG_5088.JPG
IMG_5082.JPG
IMG_5081.JPG
heuck-turkey-lacer-6-stainless-steel-pins-lacing-cord-dressing-recipe-on-back-436d89c9aeea8d60be92f62904483c91.jpg

First things first. Check with your doctor before using duct tape, titanium, and dental floss to close a wound.

Through my internet travels I saw a picture which used a needle, thread, and duct tape to close a wound. It reminded me of how you can close a turkey with lacing cord and stainless pins. This is a hybrid of the two.

Since titanium is them most hypoallergenic material known to man, it was only natural to use it in a bandage. You can get 10 feet of it for about $10.00 from Rio Grand.

Get Your Materials

IMG_5046.JPG
IMG_5044.JPG
IMG_5027.JPG
IMG_5064.JPG

For this project you will need:

  • Duct tape
  • Titanium Wire
  • Dental Floss
  • Parchment Paper

Reinforce the Ends

IMG_5054.JPG
IMG_5049.JPG
IMG_5050.JPG
IMG_5055.JPG
IMG_5056.JPG

Cut two strip of duct tape. Then fold the ends of the strips over 4 times. Place the strips, head to head, with the sticky side down on parchment paper.

Punch Holes

IMG_5058.JPG
IMG_5059.JPG
IMG_5061.JPG
IMG_5062.JPG

Use crafting punch to cut four holes. One in each corner. If you don't have a crafting punch you can cut small slits with a knife.

Cut Your Wire

IMG_5067.JPG
IMG_5072.JPG
IMG_5074.JPG
IMG_5075.JPG
IMG_5076.JPG

Cut a section of titanium wire and roll over one end. You don't want any sharp edges.

Thread the wire through the holes as shown in the photos.

Roll over the remaining ends.

Roll up the bandage in the parchment paper for storage.

Lace It Up

IMG_5077.JPG
IMG_5078.JPG
IMG_5090.JPG
IMG_5082.JPG
IMG_5045.JPG

Place the bandage over you split skin. Pull the two strips together like you're pulling your shoe laces tight. Tie a couple knots to secure it. Thanks for reading.