Duct Tape Heart

by SteelLegJ in Craft > Duct Tape

4167 Views, 3 Favorites, 0 Comments

Duct Tape Heart

temp_654010910.jpg
temp_124796717.jpg
temp_-555107991.jpg
Here is a quick heart made from a duct tape rod and 4 small strips of duct tape.

Making a Rod

temp_1563588855.jpg
temp_-886865796.jpg
temp_491673113.jpg
temp_-51879229.jpg
temp_1860758448.jpg
temp_810155868.jpg
temp_684114727.jpg
temp_950003316.jpg
temp_-1289738321.jpg
temp_-1003042764.jpg
temp_2079747532.jpg
Place a strip of duct tape face down about 15 inches long on a giant mouse pad. Then starting a side, pick up a small bit of the duct tape and pinch it over on the non sticky side. I use both hands at a time doing this and only do about an inch at a time till I do the whole length of it. At this point I have really pushed the duct tape into the mouse pad and I need to break the bond it has developed. Tear up the strip and gently lay it back down and lightly get the creases out, till it's laying flat again on the mouse pad. Place your fingers evenly across the strip and push forward. This technique WILL take lots of practice to get it perfect. Once finished rolling it you will have a sticky rod.

Coloring the Rod

temp_723250321.jpg
temp_-1689025632.jpg
temp_1106743281.jpg
temp_-717621590.jpg
temp_-554478750.jpg
temp_1732026614.jpg
temp_-252070478.jpg
Cut a strip of colored the same length as the sticky rod. Place the color face down/sticky side up. Carefully place the sticky rod on the edge of the strip. Give it a half roll and pat down the edge of the strip. Put your fingers evenly across the rod and push down and forward.

Making the Heart

temp_-438566022.jpg
temp_-1843645479.jpg
temp_899134345.jpg
temp_1415431479.jpg
temp_1533184929.jpg
temp_-2012691538.jpg
temp_-1381822599.jpg
temp_809227406.jpg
temp_-523320340.jpg
temp_796771187.jpg
temp_596762894.jpg
temp_87899232.jpg
temp_1336683864.jpg
temp_-1872167514.jpg
temp_-476039190.jpg
temp_12242919.jpg
Prepare 4 small strips of duct tape, fold the color rod in half and tape the ends together using 2 of the strips. Bend the rest of the rod around alot to get the heart shape. Tape the inside heart using the other 2 strips.
All done! You can even add a pen!