Dragon's Teeth Paracord Bracelet

Hey everybody, today I will show you how to make the Dragon's teeth paracord bracelet

For this instructable, you will need:
-paracord
-buckle
-scissors
-lighter
-needle nosed pliers
-jig (optional)

Alright, first we need to make a four strands cow hitch setup.

Step 1: Find the middle of the length of cord then fold it in half and make a loop
Step 2: Pull it through the buckle
Step 3: The loop will be the length of your bracelet, don't worry if it seems big, because the weave is pretty thick
Step 4: Take the right cord and bring it under and out the loop
Step 5: Loop it around and push it upwards from under the buckle
Step 6: Push the cord down through the small loop
Step 7: Tighten
Step 8: Repeat steps 4 through 6 for the other side

Step 9: Turn the bracelet 180°
Step 10: Bring the right cord down them upwards through the loop
Step 11: Bring the cord around and push it upwards from under the buckle then push it down into the small loop and tighten
Step 12: Repeat steps 10 and 11 for the opposite side

Alright, you are ready to start making the bracelet.

Step 1: Push the opposite color cord under-over-over-under the core strands
Step 2: Make a loop with the right cord through the middle and out
Step 3: Make a loop with the left cord through the middle and out
Step 4: Pull the opposite color strand under three of the core strands then over the last one
Step 5: Bring the opposite color strand back around over the two middle core strands and under the leftmost core stand
Step 6: Repeat steps 2 through 5 until you reach the bottom of the bracelet

Step 7: Take one outer working strand and wrap it twice around the core strands
Step 8: Pull it down under two rows, cut and melt
Step 9: Cut both ends of the middle working cord (in this case the blue cord) and melt the ends

Congratulations! You made the Dragon's teeth paracord bracelet. I hope that you enjoyed my instructable, and I hope that you will vote for me in the Outside contest!