Diy Modern Bird Table

this instructable will teach you how to build a lovely black and wooden and astroturf bird table.

first design your bird table and gather all of the parts that you are going to need.

then cut your base at 30cmx30cm.

measure in on two of the corners 3cm each side and put a dot.

measure on the side without dots 15cm in to the middle and then 2cm in the middle from that side ad another dot.then drill the holes at 2cm which should just fit the rods.

now that you have the legs together spray them lightly with some black spray paint.

then mesure 4 20cm peices of wood and pray them black.

then after spraying them srew 1 of them in each corner.

then cut the roof holders to 30cm and you need 2 of these but if wanted you could add another two a bit smaller to make some more support but i just went with two.

then mesure the astro turf to be 30cm x 30cm and cut it.

then stick or staple the astroturf on to the roof and spray the base of the table black