Dirty Sticky Xbox 360 Controller Fix

by mantis22 in Circuits > Microsoft

46715 Views, 22 Favorites, 0 Comments

Dirty Sticky Xbox 360 Controller Fix

temp_-362456001.jpg
How to clean xbox 360 controller

Tools U Will Need

temp_890214731.jpg
temp_909006130.jpg
temp_1820861023.jpg
temp_-949340925.jpg
A star bit, a small brush, and some cleaning solution

Remove Screws /with Star Bit

temp_689801593.jpg
temp_-542728091.jpg
temp_1640660620.jpg
Remove all screws get the hidden one under the sticker

Pull Apart Controller

temp_-1643791311.jpg
temp_-1801897394.jpg

Remove Vibration Motors (2)

temp_1056231975.jpg
temp_1334532956.jpg
temp_-1717582666.jpg
Pull white tab to remove strait up
Set aside

Remove Board

temp_-1841771267.jpg
temp_153896086.jpg
temp_-1826674115.jpg
Pry up on the board should pop up

temp_1182708067.jpg
temp_564203167.jpg
temp_767417340.jpg
Remove buttons for cleaning

Button Cont.

temp_1570686556.jpg
temp_1011865876.jpg
Using brush clean yoks as best u can

Clean Button Housing

temp_-516796223.jpg
temp_-111895361.jpg
temp_370962864.jpg
Clean any gunk on the inside of button housing

Reassemble the Controller

temp_-2009563948.jpg
temp_-1613325131.jpg
temp_-437479942.jpg
temp_-1474237021.jpg
temp_-238130750.jpg
temp_341127070.jpg
temp_-1352848481.jpg
Reverse the steps and like new controller is yours