Dice Using AutoDesk Fusion 360
by Diycreator in Craft > Digital Graphics
460 Views, 2 Favorites, 0 Comments
Dice Using AutoDesk Fusion 360
Hello, I am a student of APS School, West Bengal.
In this project, we will use Fusion 360 to create a Dice. You can even 3d print this Dice using a 3d Printer.
In this project, we will use Fusion 360 to create a Dice. You can even 3d print this Dice using a 3d Printer.
Supplies
You will require AutoDesk Fusion 360 to design this Dice.
Create a Square
The first step in order to create a 3D Cube is to create a Square so it can be used for our dice. If you have basic knowledge of Fusion 360, this should be easy for you.
Creating 6 Square to Form a Cube
Now, create six different square connected to each other to form a Cube. Add little circles to the faces. Fold the faces at 90 degrees to form a Cube.
After this you can paint the Cube based on your like and the cube will be ready.
After this you can paint the Cube based on your like and the cube will be ready.