Dias De Los Muertos "Sugar Skull" Decorations

by ejk14 in Outside > Beach

8004 Views, 40 Favorites, 0 Comments

Dias De Los Muertos "Sugar Skull" Decorations

029.JPG
      These whimsical holiday decorations give new meaning to "rock candy". Inspired by the vibrant colors and patterns of the traditional Calaveras, or "sugar skulls", as they have come to be known, these easy to make decorations can be used as doorstops, paperweights, or simply placed around the house for a splash of color and fun. A great project to do with kids, and you can make lots in just one afternoon!

Materials

013.JPG
Here are the few materials you will need to complete your skulls

- BIC Mark-it fine permanent markers, 24 color pack. (around $13 at Wal-Mart)
You could also use Sharpies or other markers, so long as they are permanent, I just prefer the vibrancy of BIC markers

- Black Sharpie pen. (around $2 at Wal-Mart)

- Small-ish white rocks. (I got mine from a local beach, but you could probably buy them at a craft store such as Michaels)

- Krylon Triple-Thick Clear Glaze (optional)




 

Wash Off Your Rocks

015.JPG
If you bought your rocks from a store you can skip this step.

Rinse off your rocks in warm water to remove any dirt, sand, etc. Dry them off with a paper towel and let them sit for a few minutes to dry out entirely.


**Safety Note: Do NOT use a hair-dryer to dry your rocks after washing. Extreme heat can cause wet porous rocks to explode.

Pick a Rock to Start Designing

014.JPG
Find a rock you want to use. If you aren't very confident in your artistic ability, it may be easier to start with a large, round or oval-shaped rock. 

Create Personalities for Your Rock(s)

018.JPG
Using the black BIC marker, draw some basic "skull" faces on your rocks.

Start Color Designs

019.JPG
Using any color markers, begin a simple design. Try abstract flowers, swirls and lines.

Add More Colors!

020.JPG
Add more colors and designs to your skull, the more you practice the more intricate designs you can make!

Add Fine Details

021.JPG

Using your Sharpie pen, add small details- outlines, small dots and swirls.

Seal Your Design (optional)

023.JPG
After you are happy with your design, go outside or to a well vetilated area and spray with the gaze, being sure to follow the instructions on the can. Let the glaze dry for 5-10 minutes.

Design Your Other Rocks

024.JPG
While your first skull is drying, design your other rocks, when you are finished with them, repeat step 8.

Variations

031.JPG
You can also make plain skulls and pumpkins for a traditional Halloween look.

Finished

029.JPG
033.JPG
Enjoy your one-of-a-kind decorations!

This is my first Instructable, so any feedback would be great- I'd also love to see your designs!