DIY Paracord MultiTool Belt Hanger
by Builders Shed in Outside > Paracord
2618 Views, 17 Favorites, 0 Comments
DIY Paracord MultiTool Belt Hanger
Hey guys! Today, ill show you guys how to make this really cool project! BTW, this is my first instructable.
Lets begin!
Materials
Okay to begin with, you'll need some material. Those materials are:
- MultiTool.
- 1 Meter/3.2 Feet of Paracord.
- 7-10cm of wire.
That's all material that we need!
Tools
K, we also need some tools. Those are:
- Scissor
- Ruler
- Lighter
That's it, Lets get started making it!
Making the Hanger
Let's begin making the hanger!
Put the wire inside the steel key chain for about 2cm.
Bend the wire for 180 degrees.
Twist the wire till it looks tight.
Do the same thing to the other end.
Twist em' all until it looks strong and tight as shown.
Once that done, let's make the paracord rope!
Put the wire inside the steel key chain for about 2cm.
Bend the wire for 180 degrees.
Twist the wire till it looks tight.
Do the same thing to the other end.
Twist em' all until it looks strong and tight as shown.
Once that done, let's make the paracord rope!
Making the Paracord Rope
Let's make the paracord rope!
Okay, this step is the hardest one(in my opinion), so do it carefully!
Cut the paracord for about 22cm.
Melt the ends of the paracord using you lighter.
Bend the middle of the paracord. so, u will got the middle point.
Do the same thing to the rest of the paracord.
Join the middle point of the rest of the paracord to the middle of the another paracord.
Make a knot at about 2cm from the top.
Bend the paracord into a "C" shape.
Put the other end of the paracord to the under of the "C".
Pull the same paracord end over the the straight line.
Pull the 2 paracord to tighten it up.
Do the same ting to the rest!
Once ur done, put the rest to the wire hanger and join it up to the other end as shown.
Melt both paracord, and ur done!
Okay, this step is the hardest one(in my opinion), so do it carefully!
Cut the paracord for about 22cm.
Melt the ends of the paracord using you lighter.
Bend the middle of the paracord. so, u will got the middle point.
Do the same thing to the rest of the paracord.
Join the middle point of the rest of the paracord to the middle of the another paracord.
Make a knot at about 2cm from the top.
Bend the paracord into a "C" shape.
Put the other end of the paracord to the under of the "C".
Pull the same paracord end over the the straight line.
Pull the 2 paracord to tighten it up.
Do the same ting to the rest!
Once ur done, put the rest to the wire hanger and join it up to the other end as shown.
Melt both paracord, and ur done!
Finished!
That's all! Thanks For Reading my Instructable and sorry if i have a bad english. Please Comment below and ill see u next time! Thank You!