DIY Paper Techdeck
this tech deck works and its very easy to make
Supplies
2 strips of paper
tape/glue
1 straw
pen/pencil
Fold the Papaer
the first thing to do is fold the 2 strips of paper together then fold the edges (if you want use scissors to cut it)
Wheels and Graphics
then after the first step draw your graphics and designs in the back. then put straws(make sure they fit in the board) then stick them in the side (make sure they don't cover the graphics.
Your DONE!
after that step, you are done! you can do kickflips, ollies, and sick flips but the straws don't roll. they only feel link the board has wheels.