DIY Mini Hoop Earrings!
Hello everyone! Today I will be teaching you all how to make mini hoop earrings. These earrings are seriously so adorable and I wear them almost everyday. This craft is very cheap considering you only have to purchase the wire you would like to use and takes less than 15 minutes.
Cut Wire!
Using your wire cutters cut off a few inches of your wire. Then take your wire, that you just previously cut, and cut it in half.
Bend Wire!
Take one of your cut pieces of wire and bend it around your designated cylinder. I used a fine point marker for reference. Try to bend one end of the wire to it’s flat against the cylinder and leave the other end of wire sticking straight out so it’s not flat against the cylinder. Now repeat this step with your other piece of wire.
Shape Wire
Taking your needle nose pliers round one edge of your wire so it creates a circle shape. Leave the other edge of the wire straight because it will be the spot you insert into your ear. If either edge of your wire is too long feel free to cut it with wire cutters.
Add Earring Back!
To make sure your earrings don’t fall off take a pair of earring backs and place them on the straight side of your wire. Silicone earring backs are preferred because they fit and stay on better than metal backs. You can now wear your mini hoop earrings.