DIY Macbook Pro Tablet

by koff1979 in Circuits > Apple

15634 Views, 36 Favorites, 0 Comments

DIY Macbook Pro Tablet

MacTablet.jpg
6056560074_2d1aee66bc.jpg
6056011589_9b59494bee.jpg
6056564700_4492e18117.jpg
6056562752_b413f186c0.jpg
6056016131_0c8afeecd2.jpg
6056016507_5f6e3c45bd.jpg
6056015747_b23129de87.jpg
6056021555_9f76288b3f.jpg
6056020451_d510442740.jpg
6056559728_4f2b53b30a.jpg
6056013299_b063109123.jpg
6056560422_896b1a78d6.jpg
6056562238_1ba443b84c.jpg
6056567878_5e65b3fe7f.jpg
This was my attempt at building a useable macbook pro tablet style device

The experience of using it was overall good. The 2 downsides to the tablet was the lack of muilt-touch support of the touch screen and the weight.

How it was built

What I did was to take a 17inch macbook pro take it apart. 
Place the screen upside down on top of the keyboard.
On top of the screen I place a egalax touch screen which I brought from eBay.

Below are 2 video one showing the tablet been used with some more info

And the 2nd video is showing the basic build of the tablet


As you can see if you look at the picture I Tried different cases one made out of wood and the other out of aluminium. While the wood was light it wasn't every strong the aluminium on the other hand had the opposite problem while very strong was heavy, adding 1.1kg to the overall weight of the already heavy 17inch laptop.

The device it self was good and I used it for about 6 months mainly for watching TV and films. 

The main problem I had was the OS interface wasn't design to be used with a large pointing device like a finger, so some of the smaller controls like the scroll bars and the close buttons where hard to oprate, I got around this by writing some apple scrips for changing the volume, screen brightness and closing the active window and scrolling. The laptop as a sensor in to check for movement I used this sensor to make a script which change the orientation of the screen a little like the iPad.

The iPad is a deviced that is design to be used with a touch interface OSX at the time was not and it shows when you try to use it as one. I would like to try with a macbook  air and a copy of lion to make another mac tablet and see if ios and mac os are on the same lines.