DIY Cheap FPV Wireless Goggles

this instructable will show you how you can make very simple FPV Goggles in less than 1 hour. this cheap wireless FPV GOGGLES powered by 4.3 TFT and 5.8ghz video reciever.
you can use this fpv system with your UAV, robot, car or anything you can think about.

click here to see the FPV system work.

this FPV project is going to be much better so please subscribe to my channel for more updates.

• 1 2200mah 11.1v lipo battery (can power the goggles for 5 hours) - 10$
• boscam 5.8ghz transmitter and reciever set - 30$
• 4.3 inch tft display (you can use up to 7 inch display) - 14$
• micro ccd camera (you can use any ccd camera you want) - 9$
• foam box

building the goggles

at the first step, you need to cut the foam box on 2 sides, 1 side for the 4.3 tft and the second side for your face.

after you place the display in the box, you can use its stand to hold the reciever.

place the battery on the top of the goggles and try to place it close to your face (its heavy..).

the battery already have 2 outputs, so you can just connect everythig together and make a test.

building the camera side.

the camera side need to have 3 parts:

transmitter, ccd camera, and battery.

you can use the battery of your drone or robot to power it up.

you can place the camera on the wireless pan and tilt rig and controll an angle of your view.

this project isn't done. i am going to make a lot of improvments so please subscribe for updates.