DIY CHEAPEST BOOMBOX

by VinayakG15 in Circuits > Speakers

2548 Views, 7 Favorites, 0 Comments

DIY CHEAPEST BOOMBOX

IMG_0879.JPG

in this table i am going to show you guys the a very cheap salvaged parts 6$ awesome boombox

which can blow up your ears very easily on volume one

why i want to build this

i always want to have speaker s which can blow ears even i have one but it doesn t sound tooo loud and my friends have their speakers which they buy its not that i cant afford it i dont buy those because after spending 30$ also i was not satisfyied so i decided to build one at my own and it works awesome

so without further llllllleeeeetttttsssss ddddddoooooo tttttthhhhhhhiiiiiisssssss!!!!!!!!!!!!

Gather Materials

IMG_0865.JPG
IMG_0866.JPG
IMG_0867.JPG
IMG_0863.JPG
IMG_0864.JPG
IMG_0868.JPG

materials-

1- 12v battery

1-switch

1-dc socket

1-switch

1-in4007 diode

1-7805 ic

1-audio decoder (you can use just an aux cable for the audio signal)

1- audio amp (you can use two if you want to use more than 2 apeakers)

2- 4ohms 10w speaker (connect them in series to make them one speaker)

2-heat sink

1-box

tools-

soldering iron,hot glue

HOT GLUE EVERTHING IN PLACE

IMG_0870.JPG
IMG_0871.JPG
IMG_0872.JPG
IMG_0873.JPG

JUST MAKE HOLES AND HOT GLUE EVERYTHING IN PLACE

HEAT UP THE SOLDERING IRON

IMG_0875.JPG
IMG_0878.JPG
IMG_0876.JPG
dkjbc.jpg

JUST FOLLOW THE SCHEMATIC AND BUILD THIS GUY

ALREADY DONE

IMG_0879.JPG

SO ITS VERY SIMPLE CHEAP AND AWESOME BOOMBOX

CHECK THE VIDEO ABOUT THE SOUND TESTING

IF YOU LIKE THIS MAKE SURE TO LIKE IT AND VOTE IT IN THE SPEAKERS AND AMPS CONTEST

THANK YOU!!!!!!!!!!!!!!!