DIY Bubble's Sunglasses From Spooky Tooth (The Adventures of Timmy the Tooth)

This instructable will show you how to make the sunglasses that's from The Adventures of Timmy the Tooth episode "Spooky Tooth" where Bubbles wore them when Brushbrush and Timmy were heading to the uncommon pyramids.

Buy and gather all the items needed for the spooky tooth sunglasses. You will need the following items to create it:

1. ZeroUV Retro Modern Flat Top Mirror Lens Shield Aviator Sunglasses, Pelzer Oversized Color Mirror Flat Top Shield Sunglasses, or Yves Saint Laurent Paris 2337 Shield Sunglasses

2. Eight 5 millimeter hotfix round nailheads

3. E-6000 Glue

4. Toothpick

5. Scotch Tape

Place eight nailheads on the top part of the lens, use tape to temporarily remove the nailheads after you figure out where they should go, then apply E-6000 glue on the back of the nailheads with a toothpick and place it back on the top of the lens.

Let the glue dry for about 24 hours or until completely dry and firm.