Customizable_raspberryPi4B_Pegboard_fixture

In the Hackathon, we were challenged to create a customizable pegboard fixture. Since many embedded developers have to work with a wide range of different development boards, we decided to make a customizable fixture for sorting them. The software we used is Trinckle CAD, which allows the end user to easily change the parameters of the model to adjust the size for a particular board or screen using only the front-end interface.

trCAD is software for automating 3D construction. It provides a scripting language as an interface for programming parametric 3D customizers using its own underlying CAD kernel. This makes it easy to create applications that can be used by people as well as for fully automated solutions for applications in industrial settings.

Trinckle CAD website: https://trcad.trinckle.com

Twitter: @paramate3d

Instagram: @paramate3d

LinkedIn: @trinckle

Facebook: @trinckle

This design is appropriate for the Raspberry Pi 4B and has two slots.

You will need TrCAD software, a 3D Printer and a pegboard to attach it.

The code has to be copy pasted to the platform trCAD, where the parameters can be easily adjusted without writing any code. The link to the software is in the Introduction section.