Creating a Water-Powered Spinning Fountain: a DIY Water Feature Project

by amitsaha in Workshop > Science

883 Views, 19 Favorites, 0 Comments

Creating a Water-Powered Spinning Fountain: a DIY Water Feature Project

WhatsApp Image 2024-08-06 at 11.00.45.jpeg

This project introduces a captivating water feature: a water-powered spinning fountain. Using a simple PVC structure, we demonstrate how the flow of water can create a mesmerizing spinning effect, turning a basic setup into a dynamic and engaging display. Designed as part of a series of projects for a water-themed contest, this DIY fountain showcases the potential of water to bring motion and life to everyday objects. With just a few materials and an understanding of basic mechanics, this project offers a fun and educational experience for anyone interested in the wonders of water.

Supplies

  • PVC Pipe - 3/4"" x 18"
  • PVC Pipe - 1/2" x 18"
  • PVC Fittings - 2 end caps, 2 T-joints
  • Drill Machine
  • PVC Cutter

Design

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
  • To start with, we took an 18" long pipe of 3/4" width and cut in 2 equal halves.

Create Water Outlets

7.jpg
8.jpg
9.jpg
10.jpg
11.jpg
12.jpg
  • To create the water outlets, drills of 2mm were made.
  • The holes were made in equal number on each side and in a straight line and with equal spacing.

Apply End Cap

13.jpg
14.jpg
15.jpg
  • After the holes were made, clean the holes, so that no PVC residue is left.
  • Put the end caps on.
  • Use PVC sealant too secure the end caps.

DIY Stopper

16.jpg
17.jpg
19.jpg
20.jpg
A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_01_50_04.Still009.jpg
  • To make the DIY bearing, a stopper needs to be fixed.
  • So to make the stopper, a 1/2" L-joint is taken. A rim is cut from the edge.
  • A cut-piece of 3/4" pipe of about 1" length is also taken.

Fittings

A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_02_53_19.Still001.jpg
A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_02_56_02.Still003.jpg
A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_03_00_06.Still004.jpg
A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_03_01_07.Still005.jpg
30.jpg
A Stunning Water Symphony with PVC pipes #diy #pvc #fountain.00_03_11_06.Still007.jpg
  • Next the 1/2" pipe is taken and one side is heated and slightly tapped too make slightly fat. This step is important as this will secure the 3/4" pipe of 1" doesn't come out easily from this end.
  • Then the 3/4" pipe of 1" is inserted through the 1/2" pipe and passed to the fat end.
  • Followed by the 1/2" rim. This rim will act as a stopper in the neck. So this rim has to be glued and fixed.
  • The 3/4" pipe of 1" will easily revolve on the 1/2" pipe, which will be supported by the rim below.

Structure Formation

33.jpg
35.jpg
36.jpg
39.jpg
  • Next the top frame of the project was attached.
  • The 3/4" pipe of 1" is attached with the 3/4" T-joint.
  • Another 3/4" T-joint is connected from below.

Outdoor Setup

40.jpg
41.jpg
42.jpg
44.jpg
45.jpg
  • The structure is taken outside.
  • Fixed in the ground.
  • A water supply introduced.

Final

A Beautiful Fountain using PVC Pipes

The water-powered spinning fountain project exemplifies how simple materials can be transformed into an eye-catching and functional water feature. By harnessing the natural power of water, this project not only creates a beautiful display but also serves as an engaging way to explore the principles of motion and fluid dynamics. Whether for educational purposes or simply as a creative endeavor, this project highlights the versatility of water as a tool for both learning and enjoyment. As part of the broader effort to understand and utilize water in various applications, this spinning fountain stands out as a testament to the endless possibilities that water offers in DIY projects.